﻿<?xml version="1.0" encoding="utf-8"?><ArticleSet><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Environmental and Technical Assessment of Biogas Production using Rice Straw</ArticleTitle><VernacularTitle>ارزیابی فنی و زیست محیطی تولید بیوگاز از بقایای کشاورزی (کلش برنج)</VernacularTitle><FirstPage>5</FirstPage><LastPage>11</LastPage><ELocationID EIdType="doi">10.29252/.4.6.5</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>مهسا</FirstName><LastName>خدابخشی پور</LastName><Affiliation>دانشگاه گیلان</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>محسن</FirstName><LastName>محمدی گلنگش</LastName><Affiliation>عضو هیات علمی دانشگاه گیلان</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>محسن</FirstName><LastName>خدابخشی پور</LastName><Affiliation>دانشگاه خوزستان</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>11</Month><Day>6</Day></History><Abstract>Energy consumption is increasing rapidly in the world and it is expected that unrenewable energy sources will expire in the future; therefore, new methods of energy production are becoming more common all over the world. Biogas is one of the new and clean energies, which is produced from anaerobic fermentation of biomass. Guilan province with 238,000 hectares of paddy lands has significant potential for biogas production from organic residues. In this way, this study was carried out to investigate the process of biogas production from the combination of rice straw and animal waste with the ratios of (0-100), (5-95), (10-90), (15-85), (20-80) respectively in three repetitions. The experiment was performed at mesophilic temperature by anaerobic digestion method in the 1/5 lit bottles. An economic and environmental assessment for replacement of biogas produced in this process with fossil fuels was implemented in the village of Pounel in Guilan Province. The results showed that the ratio of 10% of rice straw had the highest biogas production efficiency and by replacing the biogas, 21 percent will save in fossil fuel consumption. It will also prevent the emission of 328.42 kg of CO2 gas into the atmosphere per year.</Abstract><OtherAbstract Language="FA">انرژی مصرفی در جهان به سرعت در حال افزایش است و انتظار می‌رود که منابع انرژی غیرقابل تجدید در آینده به پایان برسد.  بنابراین، روش‌های نوین تولید انرژی در سراسر جهان متداول شده است. بیوگاز یکی از انرژیهای جدید و پاک است که از تخمیر بی‌هوازی زیست توده تولید می‌شود. استان گیلان با 238000 هکتار سطح زیر کشت برنج، پتانسیل قابل ملاحظهای برای تولید بیوگاز از بقایای آلی را دارا می‌باشد. بر این اساس این تحقیق به منظور بررسی تولید بیوگاز از ترکیب کاه و کلش برنج و فضولات دامی به ترتیب با نسبت‌های (100-0)، (95-5)، (90-10)، (85-15)، (80-20) در سه تکرار انجام شد. آزمایش در دمای مزوفیلیک با روش هضم بیهوازی درون بطری‌های 5/1 لیتری اجرا شد. ارزیابی اقتصادی و زیست محیطی بهمنظور جایگزینی بیوگاز تولیدی در این فرایند با سوخت فسیلی در روستای پونل استان گیلان انجام شد. نتایج نشان داد نسبت 10 درصد کلش بیشترین راندمان تولید بیوگاز را داشته و با جایگزینی بیوگاز 21 درصد در مصرف سوخت فسیلی صرفهجویی خواهد شد. همچنین از انتشار مقدار 14/328 کیلوگرم گاز CO2 در سال به اتمسفر جلوگیری خواهد شد. </OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">بیوگاز، ضایعات کشاورزی، کلش برنج، آلودگی</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8611</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Compare of the Application of Nano and Micro Wastes as Supplying Source of Zinc in Cucumber Hydroponic Culture</ArticleTitle><VernacularTitle>مقایسه ی کاربرد ضایعات نانو و میکرو به عنوان منبع تامین کننده ی فلز روی در کشت هیدروپونیک خیار</VernacularTitle><FirstPage>13</FirstPage><LastPage>20</LastPage><ELocationID EIdType="doi">10.29252/.4.6.13</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>سحر</FirstName><LastName>مقدسی بروجنی</LastName><Affiliation>صنعتی اصفهان</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>فتح اله</FirstName><LastName>کریم زاده</LastName><Affiliation>صنعتی اصفهان</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>10</Month><Day>6</Day></History><Abstract>In recent years, disposal of waste tires is an environmental challenge in many countries. Previous researches has been shown that rubber waste ash and its nanoparticles can be used as an effective source of zinc (Zn) for plant. In this research, feasibility of using nanoparticles and rubber waste (as zinc supplying source in plant) is studied moreover comparing the nanoparticles of rubber waste with commercial zinc sulfate fertilizer available in the market. In this regard, moreover nanoparticles production and characterization them by scanning and transient electron microscope, these wastes were used in cucumber hydroponic culture, then the quantitative and qualitative performance of the fed products were compared with the commercial zinc sulfate fertilizer available in the market. According to the obtained results, by reducing the particle size of the rubber from micron to nano, Zn extractable percentage increased from 1.5 to 2.5%. So, using rubber nanoparticles increased plant performance and also, increased Zn concentration in plant tissues compared with commercial zinc sulfate fertilizer and those grown in control.</Abstract><OtherAbstract Language="FA">دفع تایرهای فرسوده یکی از چالش های محیط زیستی سال‌های اخیر بسیاری از کشورها است. پژوهش های پیشین نشان دادند خاکستر ضایعات لاستیک و نانو‌ذرات آن منبع مناسبی از روی برای گیاه هستند. در پژوهش حاضر سعی بر آن شده تا ضمن امکان کاربرد ضایعات لاستیکی و نانوذرات آن (به عنوان منبع تامین کننده روی گیاه) و مقایسه آن با کود سولفات روی تجاری موجود در بازار امکان‌سنجی استفاده از نانو‌ذرات در گیاه مورد بحث و بررسی قرار گیرد. به این منظور ضمن تولید نانوذرات و مشخصه یابی آن با میکروسکوپ الکترونی روبشی و عبوری، این ضایعات در کشت هیدروپونیک خیار به کار گرفته شده و عملکرد کمی و کیفی محصولات تغذیه شده با نانوذرات تولیدی، ذرات میکرونی لاستیک و نیز کود سولفات روی تجاری موجود در بازار مقایسه گردید. براساس نتایج بدست آمده با کوچک شدن اندازه ذرات لاستیک از میکرون به نانو درصد روی قابل عصاره گیری از 1.5 به 2.5 درصد افزایش یافت. نتایج این پژوهش نشان داد استفاده از نانوذرات لاستیک سبب افزایش عملکرد گیاه ضمن افزایش غلظت روی گیاه در مقایسه با کود سولفات روی تجاری موجود در بازار و نیز تیمار شاهد می‌گردند.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">Cucumis sativus، روی، نانوذرات لاستیک و هیدروپونیک</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8612</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Study of the Amount and Composition of Construction and Demolition Wastes in the Karaj City </ArticleTitle><VernacularTitle>بررسی مقدار و ترکیب نخاله‌های ساختمانی کلانشهر کرج</VernacularTitle><FirstPage>21</FirstPage><LastPage>30</LastPage><ELocationID EIdType="doi">10.29252/.4.6.21</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>سعیده</FirstName><LastName>بیگدلو</LastName><Affiliation>علوم و تحقیقات تهران</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>سیدحسن</FirstName><LastName>موسوی</LastName><Affiliation>دانشگاه تهران</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>مظاهر </FirstName><LastName>معین الدینی</LastName><Affiliation>دانشگاه تهران</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>قاسمعلی </FirstName><LastName>عمرانی</LastName><Affiliation> دانشگاه آزاد اسلامی واحد علوم تحقیقات تهران</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>10</Month><Day>1</Day></History><Abstract>In Karaj, the large volume of wastes was produced due to the high level of construction activities such as demolition of old buildings and the construction of new buildings. In this regard, it is necessary to have management system with environmental protection perspective for the construction and demolition wastes (CDW). Therefore, the main purpose of this research was study of the amount and composition of CDW in Karaj municipality zones (10 zones) in 2017 with the financial support of Karaj municipality. In the first step, a little amount of CDW was investigated by Karaj waste management organization's statistics. The results showed that the Karaj construction sector produces 5973 tons (2186410 tons/year) of CDW every day, which is around 3% of the total amount of the country generated CDW. Also, the share of per capita CDW production is 1220 kg/year for each person per year and the maximum CDW generation rate was in the November and December and the minimum one was in March and April. In the second step, the composition of CDW was determined using field observations of the disposal sites and landfills. The average composition of CDW showed that up to 80% of the wastes are composed of the soil operation (soil, sand, stone and …) asphalt and concrete parts, building materials (such as brick, block, plaster, pottery, mosaic, etc.)</Abstract><OtherAbstract Language="FA">کلانشهر‌کرج، به علت حجم بالای فعالیت‌های عمرانی و ساختمانی همچون تخریب ساختمان‌های قدیمی، احداث ساختمان‌های جدید و بهسازی معابر شهری روزانه با حجم بسیار بالایی از نخاله‌های ساختمانی روبرواست که این امر ضرورت داشتن سیستم مدیریت پسماند با دیدگاه حفظ محیط‌زیست را دوچندان می‌کند. از این رو این مطالعه با هدف بررسی مقدار و ترکیب نخاله‌های ساختمانی مناطق 10 گانه کلانشهر کرج در سال 1396 و با حمایت مالی شهرداری کرج به انجام رسید. در گام نخست مقدار کمی نخاله‌ ساختمانی با استفاده از آمار و اطلاعات سازمان مدیریت پسماند بررسی گردید. نتایج نشان داد که به طور متوسط روزانه 5973 تن (سالانه 2186410 تن) نخاله ساختمانی در کرج تولید می‌شود که حدود 3 درصد از حجم کل نخاله ساختمانی کل کشور را شامل می‌شود. طبق نتایج به دست آمده سهم سرانه تولید نخاله ساختمانی در شهر کرج برابر 1220 کیلوگرم برای هر نفر در سال می‌باشد و همچنین بیشترین مقدار تولید نخاله به ترتیب در ماه‌های آذر و دی و کمترین مقدار آن به ترتیب در ماه‌های فروردین و اردیبهشت مشاهده می‌شود. در گام دوم ترکیبات تشکیلدهنده نخاله‌های ساختمانی با استفاده از مشاهدات میدانی از محل‌های دپو و دفن با روش تخمین چشمی شناسایی شد. نتایج نشان داد که حدود 80 درصد حجم این نخاله‌ها را مواد حاصل از عملیات خاکی (خاک، ماسه، سنگ و...)، آسفالت و قطعات بتن و مصالح بنایی (آجر، بلوک، گچ، سفال، کاشی، موزائیک و ...) تشکیل می‌دهند.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">کمیت، ترکیب، نخاله‌ ساختمانی، کرج، مدیریت پسماند</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8615</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Studying the Spatial Distribution Pattern using Distance and Quadratic Methods in the Zagros Recreational Areas</ArticleTitle><VernacularTitle>بررسی الگوی پراکنش مکانی با استفاده از دو روش  فاصله ای و کوادراتی در مناطق تحت تاثیر تفرج در زاگرس</VernacularTitle><FirstPage>31</FirstPage><LastPage>37</LastPage><ELocationID EIdType="doi">10.29252/.4.6.31</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>کورش</FirstName><LastName>نظرپورفرد</LastName><Affiliation>دانشگاه گیلان</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>حسن</FirstName><LastName>پوربابائی</LastName><Affiliation>دانشگاه گیلان</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>10</Month><Day>16</Day></History><Abstract>Studying the spatial pattern in plant communities is necessary for understanding the many issues in forest ecology and management. The purpose of this study is investigating the effect of recreation on Spatial patterns of trees in Zagros oak forests. Sampling methods were fixed-area plots and T-square methods. In each region, there are 40 sample plots and 40 sampling points were taken to measure the distances in the distance method in each region.   To quantify and analyze the distribution patterns in the sample method, Green, Morissita and Standardized Morisita indicators were used and The Hopkins, Eberhardt, Heinz, C, Johnson and Zimmer indicators were used in the distance methods. C, Hopkins and Heinz indicators showed a clumped pattern in the area. But the Johnson Zaimer and Eberhart indicators showed a regular pattern in the control area. The results showed that among the Sample plot indicators the Morissita and Morissita standardized indicators expressed a clumped pattern in the recreational and the control area, and the Green indicator showed a regular pattern in the recreational area and the control area. The values obtained from the distance indicators showed that the degradation in the recreational area caused a change in the spatial pattern and the spatial pattern in the recreational area was changing so that most indicators in this area showed a regular pattern. Among the distance indicators used, C and Hines indicators and among the sample method, the Green indicator showed these differences well and the species of the two regions were identified suitable to describe the spatial pattern.</Abstract><OtherAbstract Language="FA">بررسی الگوی پراکنش مکانی جوامع گیاهی، برای درک بسیاری از مسائل در اکولوژی و مدیریت جنگل ضروری است. اين تحقيق با هـدف بررسـي تـأثير تفرج بـر الگوهاي مکاني درختان در جنگل هاي بلوط زاگرس انجام شد. در اين تحقيق از روش هاي  نمونه برداري، قطعه نمونه با مساحت ثابت و فاصله اي مربع تي استفاده شد. در هر منطقه تعداد 40 قطعه نمونه 10 آری و 40 نقطه نمونه برداری برای اندازه گیری فاصله ها در روش فاصله ای در هر یک از مناطق برداشت شد. برای کمي کردن و تحليل الگوهـاي پـراکنش در روش قطعـه نمونه اي از شاخص هاي گرين، موريسيتا و استاندارد شده موريسيتا و در روش هاي فاصله اي از شاخص هاي هاپکينز، ابرهـارت، هينـز، C و جانسون و زايمر استفاده شد. شاخص های C، هاپکینز و هینز نشان دهنده الگوی کپه ای در منطقه شاهد بودند. اما شاخص جانسون زایمر و ابرهارت دلالت بر یکنواخت بودن الگوی پراکنش در منطقه شاهد داشتند. نتايج نشان داد که از شاخص هاي قطعه نمونه اي، شاخص‌های موريسيتا و استاندارد شده موريسيتا در مناطق تفرجی و شاهد الگوي کپه اي را نـشان دادند و شاخص گرین نشان دهنده الگوی پراکنش یکنواخت در مناطق تفرجی و شاهد بود. مقادير به دست آمده از شاخص‌هاي فاصله‌اي نشان داد که تخريب در منطقه تفرجی باعث تغيير در الگوي مکاني شده و الگوی مکانی در منطقه تفرجی رو به تغییر می‌باشد به طوری که بیشتر شاخص ها در این منطقه الگوی یکنواخت را نشان دادند. در بين شاخص های فاصله ای مورد استفاده، شاخص C و شاخص هينز و در بین شاخص های قطعه نمونه‌ای شاخص گرین اين تفاوت ها را به خوبي نشان دادند و براي توصيف الگوی مکاني گونه های دو منطقه مناسب تشخيص داده شدند</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">الگوی پراکنش،  تفرج، روشهای فاصله ای، مربع تی، پارک جنگلی بلوران</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8616</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>A Review of Arsenic Removal Methods from Water Resources</ArticleTitle><VernacularTitle>مطالعه مروری روش‌های حذف آرسنیک از منابع آبی</VernacularTitle><FirstPage>39</FirstPage><LastPage>46</LastPage><ELocationID EIdType="doi">10.29252/.4.6.39</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>مرضیه </FirstName><LastName>حسن زاده</LastName><Affiliation>دانشگاه گیلان</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>فریبا</FirstName><LastName>استوار</LastName><Affiliation>پژوهشکده محیط زیست جهاددانشگاهی</Affiliation><Identifier Source="ORCID">0000-0003-1844-0103</Identifier></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>11</Month><Day>5</Day></History><Abstract>Many of the pollutants in water are known to be harmful for human health and toxic for environment. Among these pollutants, Arsenic is more important because millions of people are exposed to contaminated drinking water. The World Health Organization (WHO) has identified the permitted limit of below 0.01 mg/L (10 micrograms per liter) for arsenic in drinking water and the same amount for arsenic has been reported in Iran's 1053 standard. In this study, various techniques have been investigated for removing Arsenic and efficiency of different nanoparticles in treatment of Arsenic from drinking water. Common methods of removing Arsenic from water sources are including oxidation, coagulation and flocculation, reverse osmosis and ultrafiltration, ion exchange, phytoremediation and new technologies based on the use of nanoparticles. The findings showed that despite of the high arsenic removal percentage using different methods such as oxidation, ion exchange and floating with dissolved air, these methods are not economic and a lot of time is required to achieve optimal efficiency. Recently, the use of nanoparticles has become very popular, so that metal oxide nanoparticles such as magnetic iron, Zinc, Copper, Serum, and Aluminum can completely eliminate Arsenic soluble with a high concentration of 50 mg/L in water sources and after the adsorbent is saturated, it is possible to use the regeneration of adsorbents, repeatedly by adsorbing the pollutant into the adsorbent. As a result, the use of nanoparticles is better than chemical processes and is economic due to their high efficiency in a short time.</Abstract><OtherAbstract Language="FA">بسیاری از آلاینده‌های موجود در آب برای سلامتی انسان و محیط زیست، مضر و سمی شناخته شده‌اند. در میان این آلاینده‌ها آرسنیک از اهمیت بیشتری برخوردار است، چرا که میلیون‌ها نفر در معرض آب آشامیدنی آلوده به آن قرار دارند. سازمان بهداشت جهانی، حد مجاز آن را کمتر از 01/0 میلی گرم در لیتر (10 میکرو گرم در لیتر) در آب آشامیدنی مشخص کرده است و همچنین حد مجاز آرسنیک در استاندارد 1053 ایران نیز همین مقدار گزارش شده است. در این مطالعه به بررسی تکنیک های مختلف حذف آرسنیک و همچنین کارایی نانوذرات مختلف در تصفیه آرسنیک از آب آشامیدنی پرداخته شده است. از روشهای متداول حذف آرسنیک از منابع آبی می‌توان به اکسیداسیون، انعقاد و لخته سازی، اسمز معکوس و اولترافیلتراسیون، تعویض یونی، گیاه پالایی و فناوری های نوین با تکیه بر استفاده از نانوذرات اشاره نمود. یافته ها نشان داد علی‌رغم درصد بالای حذف آرسنیک با استفاده از روش هایی مانند اکسیداسیون، تعویض یونی و شناورسازي با هواي محلول، این روش‌ها از لحاظ اقتصادی به صرفه نبوده و مدت زمان حصول به راندمان بهینه بالا می‌باشد. اخیراً استفاده از نانوذرات بسیار مورد توجه قرار گرفته است؛ بطوری‌که با استفاده از نانوذرات اکسید فلزاتی مانند آهن مغناطیسی، روی،  مس، سریم و آلومینیم می‌توان آرسنیک محلول در منابع آبی با غلظت بالای mg/L 50 را به‌طور کامل حذف نمود و پس از اشباع شدن جاذب، با واجذب آلاینده، امکان چندبار استفاده از جاذب‌ها میسر می باشد. در نتیجه، استفاده از نانوذرات نسبت به فرایندهای شیمیایی بهتر بوده و با توجه به راندمان بالا در زمان کم، از لحاظ اقتصادی به صرفه می باشد.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">آرسنیک، استاندارد، منابع آبی، روش حذف، نانوذرات</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8617</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Determination of the Relationship between Water Turbidity (NTU) and Total Suspended solids (TSS) in drip irrigation </ArticleTitle><VernacularTitle>تعیین رابطه کدورت آب (NTU) و کل مواد معلق (TSS) در آبیاری قطره‌ای</VernacularTitle><FirstPage>47</FirstPage><LastPage>54</LastPage><ELocationID EIdType="doi">10.29252/.4.6.47</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>فرهاد</FirstName><LastName>میرزایی</LastName><Affiliation>دانشیار دانشگاه تهران</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>زینب</FirstName><LastName>سجودی</LastName><Affiliation>دانشکده مهندسی و فناوری کشاورزی</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>11</Month><Day>13</Day></History><Abstract>Sand filters are composed of sand-filled containers with determined granulation and specified thicknesses of pressurized sand layers that work under pressure and they are placed in the center control system after the cyclone and before the grid or disk filter. The aim of this study was to determine the relationship between water turbidity and Total suspended solids (TSS). To determine the samples turbidity, they were tested using a spectrophotometer and the percentage of light passing was obtained through each sample separately. The test of determining total suspended solids was also performed. The results of this experiment showed that there is a quadratic equation between the percentage of light passing and total suspended solids, which is presented as the main equation from figure 3, that is more correlated with the data. As can be seen, at 450 nm, there is a higher correlation between the turbidity and the light transmittance and less error.</Abstract><OtherAbstract Language="FA">صافی های شنی از مخازن پر از شن و ماسه با دانه بندی های مشخص و با ضخامت معینی از لایه های شن و ماسه تشکیل می‌شوند که تحت فشار کار می کنند و در سیستم کنترل مرکز‌ی بعد از سیکلون و قبل از فیلتر توری یا دیسکی قرار می‌گیرند. هدف از این تحقیق تعیین رابطه بین کدورت آب و کل مواد معلق در آب است. برای تعیین کدورت با استفاده از دستگاه اسپکتروفتومتر نمونه‌ها مورد آزمایش قرار گرفتند و درصد عبور نور از هر نمونه بصورت جداگانه بدست آمد. همچنین آزمون تعیین کل مواد معلق نیز انجام گرفت. نتایج این آزمایش نشان داد که یک معادله درجه دوم بین درصد عبور نور و کل مواد معلق جامد وجود دارد که این معادله از نمودار شکل 3 که همبستگی بیشتری بین داده‌ها دارد به‌عنوان معادله اصلی معرفی می‌شود. همان‌طور که مشاهده می‌شود در طول موج 450 نانومتر بین کدورت و درصد عبور نور همبستگی بیشتری داشته و خطای کمتری وجود دارد.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">آب، کدورت، گرفتگی، مواد معلق</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8627</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Investigation of Congored dye removal from industrial waste water using adsorption method</ArticleTitle><VernacularTitle>بررسی حذف رنگ کنگورد از پساب های صنعتی با استفاده از روش جذب سطحی</VernacularTitle><FirstPage>55</FirstPage><LastPage>60</LastPage><ELocationID EIdType="doi">10.29252/.4.6.55</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>محدثه</FirstName><LastName>توکلی</LastName><Affiliation> دانشگاه آزاد اسلامی واحد رشت</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>نیلوفر </FirstName><LastName>عابدین زاده</LastName><Affiliation>عضو هیات علمی</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>9</Month><Day>30</Day></History><Abstract>These days, the removal of various dyes from industrial wastewater has become an important concern. Synthetic dyes used in industries such as textiles are complex, toxic and mutant organic materials. Congored is also an acidic dye that is considered a high- risk source of contamination and threatens the lives of humans and other living organisms. Different methods, such as electrochemical, physical and biological processes, are used to remove organic pigment from aqueous samples. Adsorption is one of the most effective modern methods of industrial wastewater treatment, which is a relatively simple and inexpensive process that produces non- toxic and low- risk products. The purpose of this study is removing the Congored dye from aqueous solutions and reviewing the accomplished researches for remove it.</Abstract><OtherAbstract Language="FA">امروزه، حذف رنگ‌های مختلف از پسابهای صنعتی به دغدغه‌ای مهم تبدیل شده است. رنگ‌های مصنوعی مورد استفاده در صنایعی مانند نساجی، موادی آلی با ساختاری پیچیده، سمی و جهش‌زا هستند. کنگورد نیز، رنگی اسیدی است که یک منبع آلودگی پرخطر به حساب می‌آید و زندگی انسان و سایر جانداران زمین را مورد تهدید قرار می‌دهد. روش‌های مختلفی مانند فرآیندهای الکتروشیمیایی، فیزیکی و بیولوژیکی به منظور حذف رنگینه آلی کنگورد از نمونه‌های آبی وجود دارد. جذب سطحی، یکی از مؤثرترین روش‌های مدرن تصفیه پساب‌های صنعتی می‌باشد که فرآیندی نسبتاً ساده و ارزان بوده و محصولات غیرسمی و کم‌خطر ایجاد می‌کند. هدف از این پژوهش، لزوم حذف رنگینه کنگورد از محلول‌های آبی و مروری بر پژوهش‌های انجام گرفته برای حذف آن است.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">حذف رنگ، کنگورد، پساب صنعتی، جذب سطحی، آلودگی</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8628</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Assessment and Environmental Impact Analysis of the Urban Streets using Multi-Criteria Decision Making Model (Case Study: 58-meter street of Arak)</ArticleTitle><VernacularTitle>ارزیابی و تحلیل اثرات محیط‌زیستی خیابان‌های شهری با استفاده از مدل تصمیم‌گیری چندمعیاره، مطالعه موردی: خیابان 58 متری اراک</VernacularTitle><FirstPage>61</FirstPage><LastPage>70</LastPage><ELocationID EIdType="doi">10.29252/.4.6.61</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>مریم</FirstName><LastName>حسینخانی</LastName><Affiliation>دانشگاه اراک</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>امیر</FirstName><LastName>انصاری</LastName><Affiliation>دانشگاه اراک</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>امیر</FirstName><LastName>هدایتی آقمشهدی</LastName><Affiliation>دانشگاه اراک</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>12</Month><Day>8</Day></History><Abstract>The purpose of this research is assessing and planning the urban streets of Arak city. In this research, environmental impacts were assessed by using these three methods: Multi-criteria like rapid matrix, ANP and fuzzy TOPSIS that both of them are decision-making methods. The process that has been followed in this study includes, determining the indicators, (using library studies), specifying geographic area, introducing the options, studying the environmental basic conditions, indicating and predicting and impacts, assessing the impacts using the three mentioned methods and providing the report. In the following, the status of the environmental factors was investigated. Then, the most important factors that might be affected by 58-meter street construction were identified using checklist, and were selected as the criteria for impact assessment. Then environmental impact assessment was separately fulfilled by using three methods like rapid assessment (matrix), fuzzy TOPSIS and ANP. Due to the the more negative impacts relatively to the positive impacts in the rapid matrix method, the project was rejected. In both fuzzy TOPSIS and ANP methods the non-execution option has the most weight and preference. But among these methods, the ANP method is introduced as a suitable method for environment impacts assessment in different projects because of its ability to create a network with interaction between criteria and options at different levels and directions.</Abstract><OtherAbstract Language="FA">هدف از این تحقیق ارزیابی و برنامه ریزی خیابان های شهری شهر اراک است. در این پژوهش ارزیابی اثرات محیط زیستی با استفاده از سه روش ماتریس سریع، تاپسیس فازی و ANP که هر دو از روش‌های تصمیم‌گیری چندمعیاره هستند انجام شد. فرآیند طی شده شامل: تعیین شاخص‌ها (با استفاده از مطالعات کتابخانه‌ای)، تعیین محدوده، معرفی گزینه ها، مطالعات وضعیت پایه محیط زیست، تعیین و پیش بینی اثرات، ارزیابی اثرات با سه روش یاد شده و تهیه گزارش است. در ادامه وضعیت موجود عوامل محیط زیست بررسی شد. سپس به‌وسیله چک لیست مهمترین عواملی که در صورت احداث خیابان 58 متری تحت تأثیر قرار می گیرند، شناسایی شدند و به‌عنوان معیار در ارزیابی اثرات خیابان انتخاب شدند. سپس با استفاده از سه روش ارزیابی سریع، تاپسیس فازی و ANP، به طور جداگانه ارزیابی اثرات محیط زیست انجام شد. در روش ماتریس سریع با توجه به اینکه تعداد اثرات منفی بیشتر از اثرات مثبت بود به اجرای پروژه رأی منفی داده شد. هر دو روش تاپسیس فازی و ANP، گزینه عدم اجرا بیشترین وزن و اولویت را به خود اختصاص داده است. اما در این میان روش ANP به دلیل توانایی در ایجاد یک شبکه با روابط متقابل بین معیارها و گزینه‌ها را در سطوح و جهات مختلف به عنوان روش مناسب برای ارزیابی اثرات محیط زیستی پروژه های مختلف معرفی شد.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">ارزیابی اثرات، مدل چندمعیاره، روش تاپسیس فازی، روش پاستاکیا، روش ANP</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8629</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Effect of Pennyroyal (Mentha Pulegium L.) on Performance, Carcass Characteristics and Some of the Blood Parameters in Broilers</ArticleTitle><VernacularTitle>تأثیر گیاه پونه (Mentha pulegium L.) بر عملکرد، ویژگی های لاشه و غلظت برخی از فراسنجه های خون در جوجه های گوشتی</VernacularTitle><FirstPage>71</FirstPage><LastPage>82</LastPage><ELocationID EIdType="doi">10.29252/.4.6.71</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>علی </FirstName><LastName>ریعان محصصی </LastName><Affiliation>گروه علوم دامی دانشکده کشاورزی دانشگاه گیلان، ایران </Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>حسن </FirstName><LastName>درمانی کوهی </LastName><Affiliation>گروه علوم دامی، دانشکده کشاورزی، دانشگاه گیلان، ایران </Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>رضا</FirstName><LastName>ناصری هرسینی</LastName><Affiliation>عضو هیئت علمی، بخش تحقیقات علوم دامی، مرکز تحقیقات و آموزش کشاورزی و منابع طبیعی استان گیلان، سازمان تحقیقات، آموزش و ترویج کشاورزی، رشت، ایران</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>علی </FirstName><LastName>میرزا آقازاده </LastName><Affiliation>گروه علوم دامی، دانشکده کشاورزی، دانشگاه ارومیه، ایران </Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>حامد</FirstName><LastName>کیومرثی</LastName><Affiliation>مركز تحقيقات كشاورزی و منابع طبيعی استان گيلان</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>10</Month><Day>22</Day></History><Abstract>To investigate the effects of pennyroyal (Mentha pulegium L.) powder on performances, the concentration of some blood parameters and carcass characteristics of broilers, 160 one-day-old Ross chicks were used in the form of a completely randomized design with four treatments and four repetitions. Experimental treatments included the levels of zero (control), 0.2%, 0.4%, and 0.6% of pennyroyal powder. The treatment containing 0.6% of pennyroyal powder compared to the control group had higher feed consumption in the starter period (P &lt;0.05). However, there was no significant difference during the growth period and the whole experimental period. In terms of average daily weight gain and feed conversion ratio, there was no significant difference between the experimental treatments during the starter, growth and the whole experimental periods. The carcass percentage decreased significantly at the age of 42 days in treatments containing pennyroyal powder compared to the control group (P &lt;0.05). There was no significant difference between experimental treatments in terms of weight percentage of carcass components including thigh, chest, abdominal fat, heart, liver, and gizzard. The concentration of triglycerides and plasma VLDL decreased significantly in treatments containing pennyroyal powder and decreased linearly compared to the control group (P &lt;0.05). In terms of cholesterol and plasma HDL levels, a significant decrease was observed in treatment containing 0.4 level and treatment containing 0.2 percent of pennyroyal powder compared to the control group (P &lt;0.05) respectively. Plasma LDL levels were not affected by experimental treatments. The results of the present study showed that the use of limited levels of pennyroyal powder up to 0.6% has no significant effect on the performance of broilers.</Abstract><OtherAbstract Language="FA">به منظور بررسي اثرات پودر گیاه پونه (Mentha pulegium L.) بر عملکرد، غلظت برخی فراسنجه های خون و ویژگی های لاشه جوجه‌های گوشتی، از 160 قطعه جوجه یک روزه راس در قالب طرح كاملاً تصادفي با چهار تیمار و چهار تکرار استفاده شد. تیمارهای آزمایشی شامل سطوح صفر (شاهد)، 2/0، 4/0 و 6/0 درصد پودر پونه بودند. تیمار حاوی 6/0 درصد پودر پونه در مقایسه با گروه شاهد در دوره آغازین مصرف خوراک بالاتری را به خود اختصاص داد (05/0P&lt;)؛ با وجود این در دوره رشد و نیز در کل دوره آزمایش، تفاوت معنی داری بین تیمارها مشاهده نشد. از نظر میانگین افزایش وزن روزانه و ضریب تبدیل خوراک در دوره های آغازین، رشد و کل دوره ی آزمایش نیز تفاوت معنی داری در بین تیمارهای آزمایشی مشاهده نشد. درصد لاشه در سن 42 روزگی در تیمارهای حاوی پودر پونه در مقایسه با گروه شاهد به طور معنی داری کاهش یافت (05/0P&lt;). درصد وزنی اجزای لاشه شامل ران، سینه، چربی بطنی، قلب، کبد و سنگدان تحت تأثیر تیمارهای آزمایشی قرار نگرفت. غلظت تری-گلیسرید و VLDL پلاسما در تیمارهای حاوی پودر پونه به طور معنی دار و خطی در مقایسه با گروه شاهد کاهش یافت (05/0P&lt;). در رابطه با سطوح کلسترول کل و HDL پلاسما، به ترتیب کاهشی معنی دار در تیمار حاوی سطح 4/0 و تیمار حاوی سطح 2/0 درصد پودر پونه در مقایسه با گروه شاهد حاصل شد (05/0P&lt;). سطوح LDL پلاسما تحت تأثیر تیمارهای آزمایشی قرار نگرفت. نتایج پژوهش حاضر نشان داد که استفاده از سطوح محدود پودر پونه تا سطح 6/0 درصد تأثیر قابل ملاحظه ای بر عملکرد جوجه های گوشتی ندارد.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">جوجه گوشتی، پودر پونه، عملکرد، فراسنجه های خون، ویژگی های لاشه</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8631</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Application of Drastic Model in the Studying Process of Industrial Development of Sari Plain</ArticleTitle><VernacularTitle>کاربست مدل دراستیک در بررسی روند توسعه صنعتی دشت ساری با تاثیر بر آلودگی زیست محیطی</VernacularTitle><FirstPage>83</FirstPage><LastPage>92</LastPage><ELocationID EIdType="doi">10.29252/.4.6.83</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>محمد</FirstName><LastName>رحمانی</LastName><Affiliation> استادیار گروه علوم محیط زیست</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>طاهره</FirstName><LastName>آذری</LastName><Affiliation>دانشگاه شیراز</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>10</Month><Day>15</Day></History><Abstract>New industrial estates developments must follow the effective factors in protection, management and sustainable development of aquifers and water resources in a plain in order to meet the needs of people. Therefore, assessment of the aquifer vulnerability potential for locating new industrial estates settlements is necessary. So, investigation of the vulnerability of Sari plain groundwater resources for locating the industrial zones is necessery. In this research, the risk map of the plain was prepared using a drastic model to assessment of the effective hydrogeological factors in locating the industrial estates of Sari plain. The results of the Drastic model showed that Sari aquifer vulnerability is classified in three groups of highly vulnerable (10.49%,), very highly vulnerable (56.66%) and too highly vulnerable (32.85%). Sensitivity analysis based on two-way single parameter and parameter deletion methods showed that the depth of the water-table factor is the most sensitive factor on the DRASTIC vulnerability index. Sari aquifer is strongly affected by agricultural and industrial activities' pollutants due to shallow water-table; so, the study area is not suitable for establishment of industrial estates based on the final vulnerability map, the aquifer extreme vulnerability potential and the amount of exsisting pollutant. Also, if environmental considerations are not respected by farmers and the existing industrial units in the plain, the aquifer will be suffering serious damages.</Abstract><OtherAbstract Language="FA">در ایجاد شهرک‌های جدید صنعتی به منظور پاسخگویی به نیازهای مردم بایستی به عوامل و فاکتورهای موثر در حفاظت، مدیریت و توسعه پایدار آبخوان‌ها و منابع آبی موجود در یک دشت توجه گردد. لذا بررسی پتانسیل آسیب‌پذیری آبخوان جهت مکان‌یابی شهرک‌های جدید صنعتی لازم و ضروری می باشد. در این تحقیق، جهت ارزیابی عوامل هیدروژئولوژیکی اثرگذار در مکان‌یابی شهرک‌های صنعتی در دشت ساری به عنوان مطالعه موردی، نقشه خطرپذیری دشت با استفاده از مدل دراستیک تهیه گردید. نتایج حاصل از مدل دراستیک نشان داد که آسیب‌پذیری آبخوان دشت ساری در سه گروه آسیب‌پذیری بالا (49/10 درصد)، بسیار بالا (66/56 درصد) و بسیار بسیار بالا (85/32 درصد) قرار می گیرد. تحلیل حساسیت به دو روش تک پارامتری و حذف پارامتر مشخص می‌نماید که عامل عمق آب زیرزمینی بیشترین حساسیت را در شاخص آسیب‌پذیری دراستیک ایجاد می‌کند. آبخوان دشت ساری به دلیل عمق کم آب زیرزمینی به شدت تحت تأثیر آلاینده‌های حاصل از کشاورزی و فعالیت شهرک‌های صنعتی قرار می‌گیرد لذا منطقه مورد مطالعه براساس نقشه نهایی خطرپذیری، پتانسیل آسیب‌پذیری شدید آبخوان و میزان آلودگی موجود در آن، جهت ایجاد شهرک‌های جدید صنعتی از موقعیت مناسبی برخوردار نمی‌باشد. همچنین در صورت عدم رعایت ملاحظات زیست محیطی توسط کشاورزان و واحدهای صنعتی موجود در دشت، خسارات جبران ناپذیری به آبخوان وارد می شود.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">آسیب‌پذیری، دراستیک، ساری، آبخوان، توسعه صنعتی</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8632</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>The Study of Environmental Impacts of Pistachio Production Using Life Cycle Assessment, (Case Study: Rafsanjan City)</ArticleTitle><VernacularTitle>بررسی اثرات زيست محيطي توليد پسته با روش ارزيابي چرخه حيات، مطالعه موردي: شهرستان رفسنجان</VernacularTitle><FirstPage>93</FirstPage><LastPage>102</LastPage><ELocationID EIdType="doi">10.29252/.4.6.93</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>مریم</FirstName><LastName>رجایی</LastName><Affiliation>دانشگاه یزد</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>محمد رضا</FirstName><LastName>علمی</LastName><Affiliation>دانشگاه یزد</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>مهین</FirstName><LastName>ملکیان</LastName><Affiliation>دانشگاه یزد</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>9</Month><Day>17</Day></History><Abstract>Life Cycle Assessment method is an accepted approach for assessing the environmental impacts of a product's life cycle, which is calculated on the basis of two components: the amount of consuming resources and the release of pollutants to the environment. In this study, the environmental impact assessment of pistachio production from the beginning of planting to the field door was estimated using Life Cycle Assessment (LCA) method in Rafsanjan. Initial data were collected through questionnaire method and interview with local farmers. The collected data were analyzed using Ecoinvent®3.0 database and Simapro8.0.4.30 software. The system boundary, field and work unit were considered as a ton of pistachios in this study. The results of this study showed that the use of diesel and electricity as energy sources lead to the release of CO2, NOx, SOx and heavy metals into the environment. Analysis of the pistachio data showed that emissions from fertilizers in the layers had the highest role in source reduction, global warming, toxicity to humans, toxicity to marine aquatics and chemical photooxidation. Emissions from fuel consumption had the greatest effect on ozone layer depletion.</Abstract><OtherAbstract Language="FA">روش ارزيابي چرخه حيات رویکردی مورد قبول براي ارزيابي اثرات زيست محيطي سراسر چرخه حيات يك محصول می باشد كه براساس دو مؤلفه ميزان مصرف منابع و انتشار آلاينده ها به محيط زيست محاسبه مي‌شود. در این مطالعه، ارزیابی اثرات زیست محیطی تولید پسته از ابتدای کاشت تا درب مزرعه با استفاده از روش ارزیابی چرخه حیات (LCA) در شهرستان رفسنجان برآورد شد. اطلاعات اولیه به روش پرسشنامه و مصاحبه با کشاورزان منطقه جمع‌آوری شد. داده‌های جمع‌آوری شده با استفاده از پایگاه داده‌ای Ecoinvent®3.0 و نرم‌افزار Simapro8.0.4.30 تجزیه و تحلیل شد. مرز سیستم، مزرعه و واحد کاری در این مطالعه یک تن پسته در نظر گرفته شد. نتایج این مطالعه نشان داد که استفاده از دیزل و الکتریسیته به عنوان منابع انرژی منجر به انتشار CO2، NOx ، SOx و فلزات سنگین به محیط می‌شود. تجزیه و تحلیل داده‌های پسته نشان داد که انتشار ناشی از کودها در طبقات، بیشترین نقش را در کاهش منبع، گرم شدن جهانی، سمیت برای انسان، سمیت برای آبزیان دریایی و فتواکسیداسیون شیمیایی داشت. انتشار ناشی از مصرف سوخت‌ها بیشترین اثر را در تخریب لایه ازون داشتند.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value"> اثرات زیست محیطی، ارزیابی چرخه حیات، اسیدیته، رفسنجان، پسته</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8633</ArchiveCopySource></ARTICLE><ARTICLE><Journal><PublisherName>مرکز منطقه ای اطلاع رسانی علوم و فناوری</PublisherName><JournalTitle>پژوهش و فناوری محیط زیست</JournalTitle><ISSN>2676-3060</ISSN><Volume>4</Volume><Issue>6</Issue><PubDate PubStatus="epublish"><Year>2020</Year><Month>8</Month><Day>5</Day></PubDate></Journal><ArticleTitle>Investigation and prediction on Forests Covers Changes Using Fuzzy Object-Based Satellite Image Classification and CA-Markov (case study: City of Romeshkan)</ArticleTitle><VernacularTitle>بررسی و پیش‌بینی تغییرات پوشش جنگل‌ها با استفاده از طبقه‌بندی شیءگرا فازی تصاویر ماهواره‌ای و زنجیره مارکوف، مطالعه موردی‌: شهرستان رومشکان</VernacularTitle><FirstPage>103</FirstPage><LastPage>114</LastPage><ELocationID EIdType="doi">10.29252/.4.6.103</ELocationID><Language>fa</Language><AuthorList><Author><FirstName>رحمان</FirstName><LastName>زندی</LastName><Affiliation>عضو هیات علمی دانشگاه حکیم سبزواری</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>هژار</FirstName><LastName>شهابی</LastName><Affiliation>دانشگاه تبریز</Affiliation><Identifier Source="ORCID" /></Author><Author><FirstName>ابراهیم</FirstName><LastName>اکبری</LastName><Affiliation>دانشگاه فردوسی</Affiliation><Identifier Source="ORCID" /></Author></AuthorList><History PubStatus="received"><Year>2019</Year><Month>11</Month><Day>6</Day></History><Abstract>Forest is a valuable heritage and one of the important factors in the ecosystem of each area that in addition to using and exploiting them, they should be preserved. Zagros’ forests, especially in Lorestan province due to negligence have been destroyed throughout past years. The aim of this research is to investigation, detect and modeling Romeshkan’s forests’ cover changes. To do this, first changes that were taken place between 1987-2017 were extracted by satellite Landsat images and using Fuzzy Object-Based classification method, then, were classified in 5 classes (Agriculture, Forest, Range, water and Residential). Finally, classification results show that there is a sharp decrease of forested areas (81.17 km2) and an increase of Range and Farmlands over past 30 years in the forest area. In a period of 1987-2002 forest cover of the study area had not faced major changes, but most of the rangelands turned to farmlands. While in the second period from 2002 onwards forest cover dramatically dipped and its area decreased from 122.58 km2 to 43.42 km2 in 2017, which the rate of forest covers decrement was around 79.16 km2. Moreover, in order to predict forest cover changes in the future CA-Markov model was applied that indicates 10.70% of current forest covers will be reduced in 2030, and the main changes will be occurred between forest classes to farmlands and rangelands classess by 6.901 and 9.172 km2, respectively. </Abstract><OtherAbstract Language="FA">جنگل‌ها میراثی گران‌بها و یکی از عوامل مهم در اکوسیستم هر منطقه می باشند که علاوه‌ بر استفاده و بهره برداری از آن‌ها، در حفاظت و صیانت‌‌شان نیز باید اقدامات اساسی صورت گیرد. جنگل‌های زاگرس، به‌ویژه در استان لرستان، طی سالیان گذشته، در اثر بی‌توجهی روبه‌ زوال نهاده و چهره متفاوتی به خود گرفته‌اند. هدف این تحقیق بررسی، آشکارسازی و مدل سازی آینده تغییرات پوشش جنگل‌های شهرستان رومشکان می‌باشد. بدین منظور ابتدا تغییر کاربری‌های صورت گرفته بین سال‌های 1987 و 2017 با استفاده از تصاویر لندست و تکنیک طبقه‌بندی فازی شیءپایه استخراج شد، و به کلاس های (کشاورزی، جنگل، مرتع، عوارض آبی، مسکونی) طبقه بندی شدند. نتایج حاصل در طول سی سال کاهش شدید (17/81 کیلومترمربع) مناطق جنگلی و افزایش اراضی کشاورزی و مرتع در مناطق جنگلی را نشان می دهد. در بازه زمانی 1987-2002 جنگل ها دچار تغییرات خاصی نشده و عمده تغییرات شامل گسترش طبقه کشاورزی در مراتع بوده است. در بازه دوم از سال 2002 به بعد پوشش جنگل ها دچار کاهش شدید شده و مساحت آن‌ها از 58/122 به 42/43 کیلومتر مربع در سال 2017 رسیده است که 16/79 کیلومترمربع کاهش نشان داد. در ادامه برای پیش‌بینی روند تغییرات از زنجیره مارکوف استفاده شد که با توجه به نتایج پیش‌بینی زنجیره مارکوف در سال 2030، در نواحی جنگلی تغییراتی معادل 70/10 درصد اتفاق خواهد افتاد و عمده تغییرات مربوط به تغییر کاربری از کلاس جنگل به کلاس‌های کشاورزی و مرتع به ترتیب با 901/6 و 172/9 کیلومتر مربع خواهد بود.</OtherAbstract><ObjectList><Object Type="Keyword"><Param Name="Value">پوشش جنگلی، طبقه بندی شیءپایه تصاویر، CA مارکوف، لندست، رومشکان</Param></Object></ObjectList><ArchiveCopySource DocType="Pdf">http://journal.eri.acecr.ir/fa/Article/Download/8634</ArchiveCopySource></ARTICLE></ArticleSet>